to our newsletter

and select which news you want to receive

PIC - SAPPO News - Sponsor 2022

Keys for implementing a successful sow feeding program on-farm

Ideal body conditioned sows are desired because they will maximize herd performance and have a greater chance to complete three parities compared to thin or fat sows. A sow feeding program needs to be implemented gradually and smoothly to avoid sudden changes in body condition during gestation. Let’s talk more about the five main steps to execute a successful sow feeding program.

Body condition assessment
PIC recommends obtaining body condition measurements using calipers at four time points:

  • Weaning;
  • pregnancy check (~30 days);
  • 90 days, if individually housed (if group-housed, visual observation at 90 days); and
  • farrowing

PIC does not recommend categorising and feeding gilts by body condition. Body condition assessment is ideally done with two people: one to assess and mark, and the other to adjust feeders and record data. Try to do this in the morning once feed is dropped and the sows are standing.

Breeding choices and quality control
Body condition management starts at the first breeding. To start gilts off strong, ensure that they meet the following criteria before breeding:

  • Age at puberty: 1+ recorded heat by 195 days of age.
  • Number of estrus at first breeding: Breed gilts on at least the second detected estrus.
  • Age at first breeding: Breed gilts between 200 and 225 days of age.
  • Body weight at first breeding: Breed gilts between 135 kg and160 kg body weight

PIC does not recommend the use of calipers on gilts prior to their first farrowing. Instead, try a flank-to-flank tape or a heart-girth tape.

If sows are extremely thin (below the thin level) at weaning or rebreeding, consider not breeding them. If they are P3 or below, consider skipping a heat. If sows are extremely fat (over the caliper fat label) at weaning or rebreeding, review their performance records to identify reproductive issues. Consider not breeding them if they are P5+ and are not needed to meet breeding targets.

Weaning and breeding row organisation
When moving sows out of farrowing to the weaning area, group P1 and thin sows to facilitate:

  • wean-to-service interval;
  • boar exposure; and
  • feeder adjustment.

In both individually and group-housed sows, when moving weaned sows to breeding, or bred sows to gestation, group sows by body condition to facilitate:

  • subsequent body condition assessment;
  • reduced feeding time stress; and
  • body condition recovery of thin females.

Feeder adjustment and calibration
Adjust feeding levels immediately after body condition assessment. Adjust feed box settings at the same time the caliper is used per nutritionists’ recommendations. Visit PIC’s recommendations on feeding levels for body condition management.

Improper feeder adjustment is one of the most common opportunities at farms. Electronic sow feeders (ESF) should modify the feeding curve in the system.

Organising your breeding row based on body condition will help with weekly execution of feeder adjustments. Routinely adjust feed boxes properly and allocate correct amount of feed by body condition. Never feed gilts below the PIC recommended base level, regardless of their body weight at breeding.

Record body condition data
Record all body condition data, and clearly mark sows based on the observed body condition. Make and execute the schedule to reassess the thin sows, and once their body condition has recovered to ideal, feed them at the base level.

Please note: Although body condition management is the best way to implement a successful sow feeding program, it will take at least one full cycle through the farrowing house to bring the herd into ideal condition.

You can read the original article as published on here.

Share on facebook
Share on twitter
Share on linkedin